退扭机系列

适用范围：
本机为生产超五类及以上数字缆对绞机反扭放线配套设备
性能及参数：
1.旋体电机功率3.7KW变频调速1台
2.主动放线机0.75KW变频调速2台
3.适用线盘:MAXφ500(外径)xMAX320(外宽),亦可根据客户要求订制
4.绞弓转速:MAX1000RPM
5.线盘升降为电动式,设上下到位行程开关保护
6.线盘顶紧为机械式手动锁紧,安全可靠
7.传动为同步带传动,传递准确,噪声低
8.单盘重量要求:<250kg;放线张力3-10N
9.退扭率:0-50%,任意设定
10.储线架式张力感应架,与放线电机联动,保证恒张力放线
11.旋体绞弓与对绞弓臂设定同步比例联动控制
12.设张力过大、断线报警停机功能
13.机体面积:长2100X宽1300X宽2000
14.总重:约2200KG

Applicable scope:
This machine for produce,exceed five and digital cable the above sprain and set the corallary
eauipment of line free to the entangling machine instead
Performance and parameter:
1.Rotate power of motor of the body 3.7KW 1 inverter adjust the speed
2.Active paying out device machine 0.75KW 2 inveter adjust the speed
3.Applicable thread plate:MAX 500(outside diameter) x MAX320(outside width),May decide by customer
4.Entangle and bend the rotational speed:MAX1000RPM
5.Thtead one hoisted or lower for being battery operated,Set up and put the journey in place and
put the switch in place to protect from head to foot
6.Line each manual to lock for machinery type,It is saft and reliable
7.The transmission,in order to take the transmission in step, accurate to transmit,the noise is low
8.Single weight is required:<250kg;pay-off tension3-10N
9.Return the spraining rate:0-50%,Establish arbitrarily
10.Store the line posture tension reaction shelf,link with putting the line motor
11.Rotate body entangle,bend with dending arm establish synchronous proportion link and control
entangling
12.Set up tension to be too big breaking,calling the police,shutting down functioning
13.Area:LxWxH(2100X1300X2000)
14.Gross weight:2200KG